Home Typewriters 1960 Royal FP
Typewriter

1960 Royal FP

Working / Cleaned standard manual Serial #FPS-7058380
1960 Royal FP

Notes & Description

This Royal FP has a serial starting with “FPS” which means “special order”. What’s probably special about it is the international keyboard layout, with dead keys for accented letters.

I bought this in April 2020, right after the start of the “shelter-in-place” order related to the COVID-19 pandemic. I couldn’t go pick it up immediately, and I only got my hands on it in November 2020. Just over a year after I purchased it, I finally got to do a basic cleaning (removing panels, compressed air, mineral spirits, cleaning the body with Simple Green, light polishing of the exterior, and wax for a little shine).

It types really well and, unsurprisingly, reminds me of my Royal KHM. It features an Elite (12 cpi) typeface.

What’s a little surprising is the large footprint of the machine. It is deep!

Also note the special Royal spools. These are large plastic spools, and necessary to trigger the ribbon reverse. The original ribbon had a loop on each end to hook up to bar in each spool. But you can also just attach a regular ribbon.

There are scratches in the back, which appears to be a common problem, and a few other scratches and dents. Otherwise, the machine is in really good condition cosmetically, especially from the front, which matters the most. The letters “OPC” or “OPF” are lightly engraved in the paint on the back of the left side.

I really like the look with the fancy red “Royal” badge in the front. It has a distinctive 1950s/1960s style, while the heritage of the Royal 10 is obvious with the (covered) side openings.

Based on the sticker under the carriage, this machine was used at the University of California.

See the blog post linked below for more.

Typeface Specimen

Typeface specimen from 1960 Royal FP

Related Posts & Guides

Comments powered by Disqus.