Home Typewriters 1971 Hermes Baby
Typewriter

1971 Hermes Baby

Restored ultraportable manual Serial #9284276
1971 Hermes Baby

Notes & Description

This Hermes Baby had a broken left knob. I got a new 3D-printed one as a replacement. I also cleaned the machine and even started retrobriting the white plastic, with some degree of success. I’ll probably try more of that on the machine’s outer case. The machine also has a new platen but needs some adjustments.

I put new felt in to replace the original but deteriorating and ugly sound-deadening material. I first started with some blue, but then didn’t like it and went for red.

I also fixed the bell to give it a nice ring, by adding a small rubber washer between it and the metal frame.

Removing the body cover on this machine is not easy: there are some plastic parts that tend to break when you bend them. That’s not a big issue as the parts are hidden inside the machine, but I did crack a couple of those parts while pulling the innards out.

  • 2022-08: The platen was very hard and this machine now has a brand new platen.

Typeface Specimen

Typeface specimen from 1971 Hermes Baby

Related Posts & Guides

Comments powered by Disqus.